E110-564-4
E110-564-4 Hydraulic oil cooler, standard version
"E" range Oil cooler with Ø110mm diametre, 564mm length and 4 passes on hot side.
Standard version, with copper tubes and brass covers.
Heat exchanger (Water / Oil / fuel)
HEAT EXCHANGER (Water/Oil/Fuel)
These units are ideally suited to cooling oil in hydraulic systems, water circuits, marine reversing gear oil (gearboxes) and heat recovery. Versions are available to suit all types of fluid, whether for industrial or marine applications.
Active filters
E110-564-4/CN
E110-564-4/CN Hydraulic oil cooler, copper-nickel tubes...
"E" range Oil cooler with Ø110mm diametre, 564mm length and 4 passes on hot side.
Version with copper-nickel tubes and brass covers.
E135-564-4
E135-564-4, Hydraulic oil cooler, standard version
"E" range Oil cooler with Ø135mm diametre, 564mm length and 4 passes on hot side.
Standard version, with copper tubes and brass covers.
E135-564-4/CN
E135-564-4/CN, Hydraulic oil cooler, copper-nickel version
"E" range Oil cooler with Ø135mm diametre, 564mm length and 4 passes on hot side.
Version with copper-nickel tubes and brass covers.
G058-116-1/CC32
G058-116-1/CC32 - Oil cooler, version CC32
"G" range oil cooler with Ø58mm diametre, 116mm length, cold side connection for Ø32mm hose.
Extruded aluminium housing, Copper-Nickel tubes.
G058-116-1/NC52
G058-116-1/NC52 - Oil cooler, version NC52
"G" range oil cooler with Ø58mm diametre, 116mm length, cold side connection for Ø52mm hose.
Extruded aluminium housing, Copper-Nickel tubes.